Introduction of the titanium filter cartridge
Titanium filters cartridge designed for applications involving heat, gases, aggressive chemicals,cryogenics or polymers.Made from titanium powder, they are sintered to form rugged, fixed pore filters made to withstand temperature extremes, high pressures and repeated cleaning/backwash cycles
There are no longitudinal seams, allowing for improved mechanical strength and corrosion resistance .They are produced in a range of configurations and micron ratings to perform in a variety of liquid and gas applications.
Features of the titanium filter cartridge
1. High purity titanium powder (99%) sintered under high temperature
2. Resistant to high temperatures and corrosive environments
3. Washable and reusable, providing an economical choice
4. Uniform pore sizes, excellent filtration efficiency
Application of the titanium filter cartridge :
1, the pharmaceutical industry, a large infusion, small injection, eye drops, oral solution concentration with the decarburization of the link in the filtration and
Terminal filtering before the security filter.
2, raw material drug production process in addition to impurities filter, the material decarbonization filter and fine filter.
3, water treatment industry in the ultrafiltration, RO, EDI system security filtering, ozone sterilization filter and ozone aeration.
4, food and beverage drinks, liquor, beer, vegetable oil, mineral water, soy sauce, vinegar clarification filter.
5, the chemical industry liquid products, liquid raw materials, pharmaceutical intermediates decarbonization filtration and precision filtration, ultra-fine body, reminders
The agent of the filtration recovery, the resin after the adsorption of precision filtration and system heat conduction oil, the material of the impurity filter, catalytic gas
Purification and so on.
6, oilfield water filtration, seawater desalination field of reverse osmosis before the security filter.
7, the dye industry, high temperature decarburization, off clay filter.
8, in the gas purification, including steam, compressed air, catalytic gas purification filter.
Specification
Construction Materials | Filter Media | Ti powder sintered |
Seal Method | Thermal Bonding, No Adhesives | |
O-rings/ Gaskets(only for 222,226,DOE) | Silicone/Nitrile/EPDM/Viton/Telon | |
Technical Data | Porosity | 30-50% |
Micron Rating | 0.45, 1.0, 5.0, 10, 20, 50, 100um | |
Operating Temperature | Max.<280℃ (536 oF) | |
Max. differential pressure | 5.0 bar | |
Filtration efficiency | ≥ 90% | |
Flow rate | 0.5 T/h | |
Cartridge Size | Outer Diameter | Φ 60/80 mm |
Length(based on DOE end cap) | 10’’, 20’’, 30’’, 40’’ | |
pH | 1-14 |
Ordering Information
| Media material | Out Diameter | Micron(um) | End Cap | Length | O-ring/Gasket |
Ti-TI | 60-60 mm | 100-1 | NIL-cut end(cylinder) | 10-10’’ | S-silicone |
e.g.:TI80100NIL10S: Ti+ 80 mm +1.0 um + cut end +10’’ +Silicone | |||||
Hot Tags: titanium filter cartridge, manufacturers, sanitary, stainless steel, food grade
