Introduction of the mesh filter cartridge

The mesh filter cartridge is made by imported stainless steel wire mesh and fold with welding, it has good chemical compatibility to strong acid and alkaline, and high temperature resistant ability, it is suit for high volume liquid and gas filtration. Two type of stainless steel mesh pleated cartridge and stainless steel sintered mesh cartridge are available for different use request.

Features of the mesh filter cartridge

1. Extremely robust construction, high mechanical strength
2. Ideal for aggressive solvents, viscous and hot solutions
3. Backwashable and cleaned by chemical solvent, hot water, steam, long service life
4. Pleated Cartridge provides higher filtration area
5. Removal rating from 1.0 to 100 microns

Application of the mesh filter cartridge

1. Steam filtration
2. Pre-filtration and decarbonization of high viscosity liquid filtration
3. Removing impurities of liquids in Petrochemical industry
4. Aggressive solvents filtration
5. Highly corrosive liquid and gas purification
6. Liquids or gases filtration in high temperature and pressure

Construction Materials	Pleated mesh filter cartridge	Filter Media	SUS316L Mesh Pleated
		Micron rating	5.0, 10, 20, 50, 100um
		Porosity	65-85%
	Sintered mesh filter	Filter Media	SUS316L sintered mesh
		Micron rating	1.0, 5.0, 10, 20, 50, 100um
		Porosity	35-45%
	O-rings/ Gaskets(only for 222,226,DOE)		Silicone/Nitrile/EPDM/Viton/Teflon
	Filtration efficiency		≥ 90%
Technical Data

		Operating Temperature	Max.<300℃ (572 oF)
		Max. differential pressure	6.0 bar
		pH	1-14
Cartridge Size		Outer Diameter	Φ 60/80 mm
		Length(based on DOE end cap)	10", 20", 30", 40"