Introduction of the PES pleated filter cartridge
The absolute rate PES pleated filter cartridge is constructed of imported asymmetric hydrophilic PES membrane media and PP support layers. All construction process are thermally welded without using any glue or adhesives to get low extraction level. It has advantages of absolute rate, high porosity, and homogeneous pore distribution, which make it an ideal product for final bacterial removal.
Features of the PES pleated filter cartridge
1. Highly asymmetric PES filter media provides high dirt holding capacity and long lifespan
2. Absolute rate inherently hydrophilic PES membrane filter for final sterilizing grade filtration
3. Higher throughput and flow-rate than any other sterilizing grade filter cartridge
4. Low protein binding, suit for a broad range of pharmaceutical products
5. Excellent resistance to hydrolysis allows use in Ultra Pure Water(UPW) system
6. 100% integrity test
Application of the PES pleated filter cartridge
1. Bacterial removal of API, LPV, blood serum, biologicals, buffers, culture media and other pharmaceuticals
2. Food & beverage industry:filter of mineral water, wines and fruit juice etc.
3. Ultrapure water and disk, display, multi silicon process water in electronics
4. Fine chemicals, water process
5. Electronic industry:terminal filter for ultra pure water etc.
6. Medicine industry:Great infusion for medical purpose; bacteria removing and filter for injection etc. medicine soup and sterilizing liquid.
Construction Materials | Filter Media | Hydrophilic asymmetric polysulfone membrane |
Support Layers | Polypropylene | |
Inner core | Polypropylene | |
Outer cage, End Cap | Polypropylene | |
Seal Method | Thermal Bonding, No Adhesives | |
O-rings/ Gaskets | Silicone/EPDM/Viton/PTFE/Nitrile | |
Technical Data | Micron Rating | 0.04,0.1,0.2,0.45,0.65,0.85,1.2 um |
Operating Temperature | Normal <60℃ (140 oF) Max. <85℃ (185 oF) | |
Normal Flow Direction pressure | 4.2 bar (60.9 psi) at 25℃ (77℉ ) | |
Reverse Flow Direction pressure | 2.1 bar (30.5 psi) at 25℃ (77℉ ) | |
pH Value Compatibility | 2-13 | |
Sterilization | Flush with hot water at 121±2℃ for 30 minutes, at P≤1.0 bar (14.5psi) Cumulative Time: 8 hours | |
Cartridge Size | Outer Diameter | Φ 69 mm(2.75’’) |
Inner diameter | Φ 33 mm(1.30’’) | |
Length(based on DOE end cap) | 5’’, 10’’, 20’’, 30’’, 40’’ | |
Filtration Area(m2) | 0.65 m2/10’’ | |
Biosecurity | Endotoxin | <0.25 EU/ml |
Extractable | ≤30 mg/10’’ | |
100% Integrity test Purified water at 25℃(77 oF) | 0.04 um 0.10 um 0.20 um 0.45 um 0.65 um | ≥3.0 bar (43 psi) ≥2.1 bar (30 psi) ≥3.2 bar (46 psi) ≥2.0 bar (29 psi) ≥1.4 bar (20 psi) |
Ordering Information
Grade | Product | Micron(um) | End Cap | Length | O-ring/Gasket | Core |
F-Food & beverage P-pharmaceutical C-chemical E-electronics | AAPES
| 004-0.04 010-0.1 020-0.2 045-0.45 065-0.65 085-0.85 120-1.2 | AO-DOE(220) CN-226/FIN CF-226/FLAT BN-222/FIN BF-222/FLAT EN-222 three locking ears/Fin | 05-5’’ 10-10’’ 20-20’’ 30-30’’ 40-40’’ | S-silicone E-epdm N-nitrile T- encapsulated teflon V-viton | B-temperature resistant C-SS |
e.g.:FAAPES004AO5SC: Food & beverage+ AAPES+0.04+DOE+5"+Silicone+SS | ||||||
Hot Tags: PES pleated filter cartridge, manufacturers, sanitary, stainless steel, food grade
