
Stainless Steel Bioreactor
Description
Introduction of the stainless steel bioreactor:
1. Volume: 50-12000L
2. Material: SS316L & SS304
3. Insulation material: rock wool
4. Application: pharmaceutical, chemical, petroleum and food industries
5. Structure: Jacketed vessel, vessel with jacket and insulation
6. Finish: inside surface Ra 0.4~0.5μm by electro-polishing,outside surface Ra0.6~0.8μm by satin finish, or according to customer's requirements.
7. Components: mixing device, vent filter, temperature gauge, level gauge, manhole, sight glass with lamp and cleaning ball or according to client’s detailed requirements.
Features of the stainless steel bioreactor :
1. Convenience: Presterilized, single-use bioreactors protect against the risk of cross-contamination, require no cleaning, and involve minimal validation and they are supplied in a ready-to-use format
2. Reliability: bioreactors, including all fittings and filters, are supplied sterile and ready for use.They are suitable for GMP commercial production and a biosafety cabinet is not required for inoculation or sampling
3. Flexibility: Multiple instrument configurations for suspension, microcarrier, batch, fed-batch, or perfusion culture
Structure | Vertical, ellipse top or flat top, support by legs or lifting lugs. Single wall, or with jacket, or with insulation. |
Material | Material adopts S31603, or S30408. (Tai Steel or Bao Steel) |
Jacket Type | Full jacket, internal coil, external semi-coil, dimple jacket. |
Insulation | Adopts aluminum silicate or polyurethane, thickness 50 mm or 75 mm. |
Surface Finishing | Mechanical polishing, internal mirror polishing Ra 0.45; External matte, Ra 0.8 |
Heating Method | Steam heating, electric heating, thermal oil/hot water heating |
Agitation System | Adopt top center-entry agitator or side-entry agitator. |
Accessories | Condenser, Manhole, CIP spraying ball, thermometer, piezometer, air filter, sight glass, light, counter flange. |
Standard | All according to GMP requirements and GB150.1~4-2011 Design, Fabrication, Inspection and Acceptance. |
ODM | Can be customized according to customers requirement and product process. |
Option of control items | PH ,DO ,Foam ,feeding ,temperature ,mixing speed ,air flow ,pressure ,sterilization PLC |